3-in-1 Magic Joy Box - converts PS1/PS2, GC, and XBOX to USB. You may be able to find it elsewhere online for cheaper. EDIT: and that is a solution, but it doesn't answer your question - I had a friend who could rewire the old Xbox controllers to USB at the "break" but they had a similar wiring. Unfortunately it looks like the PS2 pinout is a It has the following specs: 100W 5A USB Type-C Decoy PD 2.0 3.0 TO 5V 9V 12V 15V 20V DC Trigger Adapter Module QC4 QC5 Charge Charging Notebook Can't post links, look it up on Ali Soldered the Wii U connector to the decoy, used the charger and USB-C cable from my Xiaomi 11T that's QC3 and voilá Arduino-based PS2 -> Macintosh Plus keyboard adapter. This sketch allows to use a PS/2 keyboard with the Macintosh Plus. Mapping between PS/2 keys and Mac keys is stored in the keymap.ino file. Sketch uses a modified version of the PS2Keyboard Library--- all the logic except getScanCode() method have been stripped. Connecting to Macintosh Plus
Re: Looking for a PS/2 to USB IC for keyboard. « Reply #15 on: July 05, 2021, 08:25:25 am ». There are two answers to this, depending on the direction you want to go: 1: USB keyboard to PS/2 PC: Easy, a passive adapter will do it provided the keyboard supports USB signalling.
If it doesn't work at 9V/3A, you'd want input at a higher voltage and another dc-dc converter back down to 8.5 or 9V. This dc-dc converter will have some loss, so power input should be >45W. I would personally use 15V/3A because my favorite small charger doesn't do 20V. Then you just need a usb-c PD decoy module and a step-down converter.
How to extend a USB or PS2 keyboard cable.Please like and subscribe if this video helped! Thanks for Watching!
The MC2SIO works in conjunction with Open PS2 Loader (OPL), and allows you to play games directly from an SD card via the memory card slot. What I found to be most surprising is apparently the memory card slot has a higher data transfer speed than the PS2’s USB ports (which are USB 1.1). Because of this, load times and gameplay video are
The standard PS/2 mouse (with Logitech mouse) defaults to 160 CPI and can be switched to 40, 80, 160 or 320 CPI with software. Microsoft mouse driver for Windows 3.x and Windows 95 defauls to 160 couns per inch. The maximum tracking rate for PS/2 mouse is 40 report/second * 255 counts per report = 10200 counts per second.
How to make a DIY USB KVM Switcher using a 4 contact 3 position selector and a few USB cables.My Original Blog post:https://cavy-lab.blogspot.com/2019/07/diy .
  • ajbo8dq49x.pages.dev/486
  • ajbo8dq49x.pages.dev/932
  • ajbo8dq49x.pages.dev/16
  • ajbo8dq49x.pages.dev/978
  • ajbo8dq49x.pages.dev/349
  • ajbo8dq49x.pages.dev/770
  • ajbo8dq49x.pages.dev/577
  • ajbo8dq49x.pages.dev/799
  • ajbo8dq49x.pages.dev/957
  • ajbo8dq49x.pages.dev/383
  • ajbo8dq49x.pages.dev/413
  • ajbo8dq49x.pages.dev/732
  • ajbo8dq49x.pages.dev/825
  • ajbo8dq49x.pages.dev/149
  • ajbo8dq49x.pages.dev/645

    • ps2 to usb diy